Testing machine in a Forge
To protection of a testing machine in a forge factory. The machine runs tests of rotation stability of forged components of big dimensions. A floating foundation has been built, with dimensions of 21 m x 6 m, height up to 2 m. A double layer of MEGAMAT ME 50 has been adopted, varying the density as function of the different and unbalanced loading conditions, due to the particular testing requirements.
_1.jpg)
.jpg)
PROBLEM
In this case the need of the owner was to limit as much as possible the vibrations transmitted to the measuring laboratory by a machine operating in the production area. The machine also did not have a homogeneously distributed load but was unbalanced on one side making the realization of the more complex anti-vibration system.
SUGGESTED SOLUTION
The proposed solution involves an anti-vibration system with an inner basement that rests on panels of the Megamat line with variable density in order to guarantee both adequate damping of the vibrations and also a constant subsidence of the system in order to balance the machinery's non-axial loads.
RESULT
The degree of insulation obtained from the anti-vibration system is 80% with a constant deflection of the base.