Anti-vibration panel, from 6 to 20 mm thickness, produced using fibres and granules of SBR rubber (Stirene Butadiene Rubber) or EPDM rubber (Ethylene Propylene Diene Monomer) compacted using a polyurethane glue; density 600 and 800 kg/m³. A non-woven, non-stretch synthetic membrane is applied on both side of panel.
SLEEPER PADS
Fields of application
- Tramway and Metro: over concrete slab or ballast
- Passengers railways or High-Speed railways: over concrete slab or ballast
- Rail Freight transport: over ballast
UNDER SLEEPERS PADS
Isolgomma SLITRACK (USP) under-sleeper solutions are mostly used for conventional lines and high-speed lines. The flexible elements are applied to the resting surface of the sleepers layed on ballasted tracks and on reinforced concrete slabs.
Main strenghts
- Highly resistant to puncture
- Increased useful life of reinforcement and ballast
- Vibration damping effect
- Increase the track life
Under Slepper Pads - on ballast
SLITRACK under-sleeper pads for track systems on ballast are mostly used for conventional lines and high-speed lines. They perform the dual role of protecting the ballast, increasing its useful life, and reducing vibrations, thanks to their intrinsic vibration damping properties.
Under Slepper Pads - on concrete
SLITRACK under-sleeper pads for track systems made from reinforced concrete slabs are products with mechanical vibration-damping properties. The reinforced concrete sleeper is covered with SLITRACK panels in order to completely protect the sleeper from the surrounding concrete.
UNDER SLEEPER PAD - BI-BLOCK
Isolgomma SLITRACK bi-block solutions for sleepers are mostly used for conventional lines and for underground railway track systems. The flexible elements are applied to the resting surface for the Bi-Block sleepers inside the rubber shoe that encloses the individual sleeper block.
Main strenghts
- High mechanical performance
- Long useful life
- Dimensions upon requests
- Increase the track life
Under Sleeper Pads - Bi-Block
SLITRACK under-sleeper pads for bi-block system are installed on the resting surface for the blocks inside the rubber shoe that encloses them. SLITRACK products are tailored to meet project specifications.